The hottest world beverage packaging

2022-08-17
  • Detail

World beverage packaging (Part 1)

while global beverage productivity seeks to reduce packaging costs and improve packaging quality, they all make choices among inherent considerations, hoping to find an appropriate balance, and the crystalline fruits show that there are huge differences in different regions of the world. However, the global packaging of inflatable soft drinks, beer, bottled water, fruit juice, new era drinks and dairy products still has many similarities

generally speaking, beverage manufacturers in mature markets such as North America and Western Europe pay more attention to highlighting goods with packaging, convenience and improving the environment. The diameter of zigzag roller: Φ 30mm (standard configuration); Benefits; However, for beverage manufacturers in developing cities such as Latin America, Eastern Europe and Asia, it is their main concern to try to save packaging functions and reduce material costs

cost of packaging materials

reducing the cost of materials has become the most common trend in the world in beverage packaging. The most obvious result can be regarded as the continuous weight reduction of beverage cans

since the price of aluminum sheet used to manufacture beverage cans increased by 50% in 1994 and 1995, beverage manufacturers continue to make efforts to use the scroll spring fatigue testing machine for aluminum cans, which is mainly used for the repeated movement of various springs, elastomers and elastic components, and the weight is reduced to only 25 to 26lbs of material per thousand aluminum cans. Many manufacturers expect to reduce the weight of materials per thousand aluminum cans to 22 pounds before the 21st century. This goal can be achieved by thinning the material used for the tank body and reducing the diameter of both ends of the tank

202 cans with bottom diameter were first popular in Europe, and were more widely accepted by American inflatable soft drink manufacturers. Although American brewers initially chose to replace 206 cans with 204 cans with a bottom diameter, most producers said they would eventually use 202 cans with a bottom diameter. Because reducing the diameter of the tank bottom can greatly save costs, Mexican juice producers are also preparing to use 202 cans

with the rising price of aluminum, the use of steel to make cans has become more and more attractive, but it is too early to say that people have abandoned aluminum cans. At least aluminum cans have been used in canned inflatable soft drinks and beer in the United States and Western Europe. On the contrary, cans are flooding the beverage markets in Asia and Africa, while beverage producers in Latin America use both

the increase in demand leads to an increase in the cost of PET bottles. In 1995, the global demand for PET resin increased by almost 25%. Based on the tight supply, the resin price increased by 20%. In addition, it is expected that the global PET beverage bottle market will grow more than times in 2000

in terms of secondary packaging, the rising cost of corrugated materials also has an impact on the beverage industry. The common reaction of insiders is to use the operating table instead of the base plate; Some manufacturers have begun to adopt shrink bundling packaging methods that can firmly support scattered bottles and cans, so as to completely replace corrugated board, cardboard and other materials

environmental issues

in choosing packaging materials, it is important to reduce the cost of materials, but environmental issues have also become a factor that must be considered. Western European countries have legislated that the beverage industry in the region should use the principle of "saving, reusing and recycling" to solve the packaging problem, making them a global pioneer. The recycling of beverage bottles is in line with the principle of environmental protection, so European countries are increasingly accepting this practice, which is widely popular in other parts of the world based on cost-effectiveness

one of the best examples of saving packaging materials in the beverage industry is the introduction of bags. At present, bagged milk has been widely accepted in Canada. This kind of packaging is suitable for one-time drinking and multiple drinking. Under the school plan implemented in Canada, mini bagged milk has accounted for 6% of the market. No matter how good the machine is, there will be factors of fixture and auxiliary equipment damage. 0% of the market, and a gallon of bagged milk also accounts for 55% of the retail volume of milk. It is expected that bagged beverages will continue to expand in the world, and bagged fruit juice and bagged water will also appear in the market one after another

the success of recycling aluminum cans in mature markets has made them a material that conforms to the principles of environmental protection. However, in the market where recycling is still in its infancy, steel is also regarded as a material with environmental benefits. Most of the steel waste can be used to fill the land, or can be discarded on the roadside to decompose by itself. It takes only 3 years, which is much faster than that of aluminum waste in 10 years

product image

in the highly competitive market, drinks must play a unique attraction on the shelves to win customers. Therefore, manufacturers have increasingly paid attention to the image of goods, so that products can be outstanding and dominate the market. Some designers with extraordinary creativity are beginning to think about the appearance of goods. Therefore, pet, which makes the packaging outline changeable, is blessed by nature. Through the use of shrink stickers, the contour quality of PET materials can be further improved and more distinctive

Copyright © 2011 JIN SHI